Originally Posted by HeavyD99

I am also new to Schumacher and was wondering the same things about "pin high or pin low" and Orlowski's 2mm bump steer. I now understand the first item, but not the bump steer. In the manual, for the steering, there are no spacers for the steering link where it mounts to the steering bell cranks, the 4mm worth of spacers mentioned above are for the camber link. So back to how is one to adjust for 2mm in bump steer? If one were to add it to the outer steering knuckle, like for typical buggies, you'd need an ultra long captive ball end, U4739, to be able to use a 2mm spacer. The kit ball end is too short. I'm not sure how to do this adjustment inboard.