R/C Tech Forums - View Single Post - New Tekin redline gen3 motors
View Single Post
Old 12-10-2015 | 06:57 PM
  #50  
Volition's Avatar
Volition
Tech Regular
 
Joined: Jul 2014
Posts: 404
From: Victoria, Australia
Default

Running in 17.5t 4wd Stock Buggy this weekend - First run this Sunday

I'll start at 6.0 FDR on a new Schumacher Cat K2 (Slipper Lockout) weighs 1730g Will report back. Should be able to get the FDR lower but we will see. I don't get a chance to practice and test due to living so far from the track. 2 trips a weekend is too much.

I believe we have lower FDR's due to our tracks being a bit larger then the ones in the states.
Knox is on a 42m(138ft) x 26m(85ft) area w/35m(115ft) straight and Keilor 40m(131ft) x 23m(75ft) w/32m(106ft) straight - Be really interested to see the sizes of your tracks.

I've ordered fan and mount kit going forward for the motor. The fastest guys run at 5.19 FDR with a fan and full timing - motors at 65c(149f) after 6minutes - I'm not going to push that hard 60c(140f) is my absolute limit. I will not let my motors go over that.

Anyways I'll keep you posted. Wish me luck and good racing to you.
Volition is offline