View Single Post
Old 12-09-2015, 10:31 AM   #568
cdraughon
Tech Apprentice
R/C Tech Elite Subscriber
 
Join Date: Nov 2013
Posts: 95
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by BobW View Post
If you are using a dual bell crank system then the direction the crank arms face definitely has an impact as the rack now moves in an arc so the direction of the arc and it's position relative to the steering hub will have a definite affect. You can get the current model to work with a reversed bell crank but it takes a little works to mirror the model so the geometry is correct. I can work that out for you if you send me the measurements. The graphic model in the program will display as it shows on the measurement worksheet though. I have a reversed bell crank steering system on my to do list.
Ok, that's what I thought. I think I have it pretty close - was able to use the model view and some negative values. I'll send the measurements to you and what I input for your reference. Thanks!
cdraughon is offline   Reply With Quote