R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
Thread: Tekno RC SCT410.3 Thread
View Single Post
Old 11-13-2015, 08:37 AM
  #2555  
justpoet
Tech Elite
iTrader: (16)
 
justpoet's Avatar
 
Join Date: Jan 2012
Location: NH, USA
Posts: 2,063
Trader Rating: 16 (100%+)
Default
Originally Posted by 8ight-e
May have missed it but what is the low down on the "drilled extra row" on a few of the setup sheets out there from Ryan & Joe's setups.. I know they don't run these much... are there some really tuned setups for a hard packed w/ loom and a good base for clay?

Also has anyone tried the carbon eb48 towers the holes are slightly higher than the stock .3 positions.. would this give a mimic to the 'extra row'

Thanks,
The extra row being referred to was for camber link positions, not shock positions. They drilled out an extra row of holes towards the middle to do testing with really long links. The end result of the testing is that the recommendation for most to start with is short links up front and medium length links in back (neither of which require the extra row of holes).
justpoet is offline  
Reply