Originally Posted by
Trident69
Hi Bro, quick check with you, i assume you got your hands on the kit and we are waiting for ours at this side of the world..anyway can you advise:
==========
1. FF/FR Hangers - is it alu or plastics?..if plastics, can the bmax 4/3 fit in?
2. RF/RR Hangers - is plastics, so can the YZ-2 ones fit in?
3. Rear upper camber block - Is Plastic, so can the YZ-2 ones ALU fit in?
4. front suspension caster - Plastic or alu?
*Believe the whole steering system is the same as YZ-2?
I believe the alu options hubs for YZ-2 can be fitted in.
Cheers!!
The aluminum rear camber block from the YZ2 will work. So will the aluminum or steel rear front hanger. The steering link is a tad different than the YZ2.
I believe the aluminum bellcrands from the YZ2 will work.
I think front suspension hangers is aluminum.
Front casters are plastic as well as rear hubs. Rear aluminum hubs for the yZ2 work. Front aluminum casters for the bmax4 I believe will work. 8 degree or 15.
MB models has all the YZ4 parts listed