R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 11-08-2015, 06:23 PM
  #43581  
EDWARD2003
Tech Elite
iTrader: (8)
 
EDWARD2003's Avatar
 
Join Date: Jan 2003
Location: Tokyo, Japan
Posts: 2,200
Trader Rating: 8 (100%+)
Default

Originally Posted by Monti
On high bite in the states I run 1.61or 1.62 rear tire and 1.57 front on a BSR/crc rim. This rim is close to 38mm front and rear.

Center spring everyone runs asc blue. The black asc springs should be fine I think they same as crc .045 or damn near. Tube lube should be 10k.

Monti
Cheers.

I'll true the tires down to 40.8 mm and 41.2 mm (converted). I'll be testing between Ulti and Yokomo front wheels. I noticed the inside of the Yokomo wheels has a lot more flex compared to Ulti. The rears will be Ulti.

Running a softer center spring (Morotech Black or Yokomo X-Shock spring) will be tested at Yatabe.

I believe the Associated black side springs work well. However, I do have Yokomo Green and Purple which are softer than Associated Black to play with. To those who don't know Yokomo Green is not Associated Green.

I think tube lube and tire saucing (time and width) were the biggest culprits to my tire lifting.
EDWARD2003 is offline