Originally Posted by
Randy_Pike
Ok, write down all your settings. Do a factory reset to clear out the esc's memory entirely. Re input your settings. Then go into data logging and make sure all the streams you want to record are checked.
Then on the bench, power up the car and work the throttle/brake for 60 seconds. Attempt to view the recording.
Result?
Randy, the data logger stopped logging again. The data streams were all unchecked. it seems after prolong use without downloading the data the data streams uncheck themselves.
I rechecked the streams and went for a drive in the street and the Logger started logging again. I didn't need to reflash the firmware in the esc or return to default settings.