Originally Posted by
A.C.R.
Chassis brace is 3mm thick, and retainers have a space of 3.1mm.
Laser sintered parts have higher tolerances than machined or molded parts, but it still should fit with a small amount of pressure or with a little bit of sanding.
Please try again. Mine fitted.
I measured with calipers, the chassis brace is 3.51mm thick, I have the second version of the kit. Maybe you have the first version
I agree that the space in the battery retainer is 3.1mm but that is not enough space to fit on the chassis brace.
I was able to sand the retainer and remove enough material to squeeze the retainers on the chassis brace