R/C Tech Forums - View Single Post - Tekno NT48 Thread
Thread: Tekno NT48 Thread
View Single Post
Old 10-14-2015 | 06:36 PM
  #1370  
qstorm777
Tech Fanatic
iTrader: (2)
 
Joined: May 2013
Posts: 855
From: Kingsport, TN (Still SC tho)
Default Camber Links
If the inside and outside holes on the tower were at the same height, would running inside hole on tower and inside hole on hub be the same as running outside hole on tower and outside hole on the hub (camber link should be approximately be the same length)? Just wondering if shifting the camber link in or out has any effect?
qstorm777 is offline  
Reply