R/C Tech Forums - View Single Post - Official Tekin RX8 GEN2 ESC Thread
View Single Post
Old 10-12-2015 | 09:23 AM
  #3116  
Randy_Pike's Avatar
Randy_Pike
Team Tekin
iTrader: (6)
 
Joined: Nov 2007
Posts: 9,912
From: Norcal
Default

Originally Posted by Volition
Question- on my data logging via Hotwire. The wide open throttle only registers as 80. Yet I get all lights on the ESC. Brake too only registers -80 when full.

I have calibrated. I'm reasonably sure I'm getting full throttle when driving. Yet Hotwire is 80.

Is this correct. I'd have thought it should show 100.
NO, what you're seeing is a total range of accepted full throttle signal. Most radios are in the 80 range here.

To verify your esc is getting full throttle/brake you can simply hold either down and watch the LED's ramp up and then flash at WOT or Full brake.
Randy_Pike is offline