Originally Posted by
ruudxd
Hmm, on the MMM1 you can not I believe, sorry!
I know nothing about the MM1.
But on the MMX the lower 3/4 of the case is all one part. This is where the sticker is. Its a tub the ESC sits in. It is also filled with some kind of resin and the ESC can NOT be removed from it. I tried.
I wanted to replace the wires they used with my own so I tried to take the ESc apart. You can remove the fan no problem. And its easy to remove the upper 1/4 of the case as it pops off with 4 clips. But that's as far as you can go. The rest is all sealed together.
You can see the part line in this pic where the upper case comes off the lower case. The sticker dose not cover this part line.
Also you have to remove the upper case half to install the sensored motor harness. So you have to take the ESC apart if you want to run a sensored motor with it.
So the warranty is fine.