R/C Tech Forums - View Single Post - TAMIYA TRF502X Thread
Thread
:
TAMIYA TRF502X Thread
View Single Post
10-06-2015, 07:47 PM
#
587
JDM_DOHC_SiR
Tech Champion
iTrader: (
31
)
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,087
Trader Rating
: 31 (100%
+
)
TRF 502Xs
For those of you that don't have access to the "Bookface" TRF Off Road Buggy page
Here is the completed project. Paul Sims a BEZERK R/C did this work and is the one who sells the conversion chassis kit
Comes with 4mm front and rear towers, 2.5mm upper decks, 3mm lower deck with no openings ( completely flat ) 3.5 mm longer and 10mm narrower as well ( same width as the TRF503 ) milled pockets, adjustable shorty battery tray to adjust the weight for optimum balance, floating servo mount brought over from the TRF503 and can be flipped to either side depending on what chassis balance configuration you want to use ESC behind the motor or esc in front of the Shorty battery. Chassis balance is a 46% Front & 54% Rear Bias ( similar to the 503 bias which is 47% Front & 53% Rear ) Also this chassis kit makes the TRF502x very light...as well for those of you that run spec classes.. 13.5 ect ect..
Reply
JDM_DOHC_SiR
View Public Profile
Find More Posts by JDM_DOHC_SiR
View iTrader Profile