R/C Tech Forums - View Single Post - NOVAROSSI Engine thread....

10-01-2015 | 04:15 AM

#8314

Chad Phillips

Tech Master

Joined: Dec 2003

Posts: 1,418

From: Amishland PA

Quote:

Originally Posted by 190mph

Your flash banners on the site indicate you are a distributor like its a new thing. So to me distributor means selling to the shops. For Novarossi you are selling to hobby shops for resale as the channel too?

Just a question on that.

Anyways:

I got a new Top Elite 8 and thinking of the Mito 4 or 7 as another motor. This would be for a buggy.

I previously ran the Rex P5X 2005 production motors.

Regarding the Mito 4 or 7.. IF you mainly run on tight small tracks get the mito 4 with 41021/9901. It produces a lot of bottom end and mid. Also use the 7mm restrictor. IF your track is wide open use the mito 7 with 41031/9901 and 6.5mm restrictor. Being its a worlds year next year. I use 25% nitro with these set ups. 30% will make the engines the little more crisp.

Reply