Originally Posted by Geezatec

If its running well off idle, but smoke to a half second ok! The LSN is set too lean for it to fluctuate. P-0 .08 small engine, adjustment on the engine are really minute(small adjustment). If its warmup turn your LSN CW(leaning out) if the idle speeds up and dies, its too lean, or turn down the idle speed. Richen the LSN(CCW) for it to drop down the idle speed( By the LSN), Like I said b4 increments are small 1/16 or less.

P-0 I had since it came out, installed on a Xray NT18. Using 30% fuel. Still have the model, haven't ran it for years. Better than the Toki 07 engine. if you can adjust you air gap with photo attached you'll be happy by the way it runs. Takes patience.