Originally Posted by Jpdanger

I checked and cleaned everything and nothing is bent or binding in the arms, links, and pins. The shocks have been cleaned and rings replaced. The shafts don't appear to be bent. I've even tried the shocks with sealed, emulsion, and also vented caps, but I still have the "settling" issue. I build the shocks with zero rebound using AE oil.

I'm starting to think that it could be the springs. If I rotate the springs around the shock without turning the collar or the perch, the RH can change by as much as 1.5mm. I'm using Core RC springs. Essentially, disturbing the shock at all has an effect on the RH.

Frustrated...