Originally Posted by
CristianTabush
Have you tried adding max dynamic caster and a little more static?
I have tried both and didn't see much change.
Originally Posted by
CristianTabush
If you post a set up on here I might be able to shed a little light. I have not run a Roche car, but it is similar enough to our car that I could offer some advice.
Here is a setup from 2 weeks ago. It is how I started running that night. Changes were minimal from there - just some toe/camber.
https://drive.google.com/file/d/0B5X...ew?usp=sharing
Last night I went to a hard center spring while maintaining the basic ride height/droop listed and I didn't see a huge difference. I picked up some low speed steering but not much else.
Attached is a weight comparison between the Roche and the SpeedMerchant (all with everything but the body). The top set of numbers is with the ESC moved forward up to just behind the receiver.