View Single Post
Old 09-02-2015, 05:43 PM   #2098
Tech Adept
Guch's Avatar
Join Date: Jan 2012
Location: Columbus, Ohio
Posts: 229
Trader Rating: 5 (100%+)

I'm one of those guys who are updating a 410.1 to a 410.3 with shock towers, arms, and hubs (Thanks RC-Waffle). I did replace the diffs as well but that was more of a maintenance issue. I have to much invested in the 410.1 aluminum hinge pin holders to update so now that I'm about to change the rear arms and outer hubs i'm lost on what .1 pills I need to use to get the .3 kit setup. I have the STD rear outer aluminum pin holder btw. I currently have a ton of rear toe and anti-squat. Drives great into corners and I hope the .3 setup performs as well. I know I'll lose 1deg. With the .3 rear hubs.
22 3.0,Orion R10/DPS 7.5,Orion 4600 shorty, Airtronics M12,Spektrum S6270
SCT410.3,RX8.2/Pro4 4600,XP DS1015,SMC 7200
If guns are ever outlawed, then I'll be an outlaw!
Guch is offline   Reply With Quote