Originally Posted by
Toyota Tom
Yes they do. It is how you adjust the tweak. You may need longer
set screws for the spring holders so you can get them to touch the chassis.
It might be helpful to look at the build directions for the 12R5 go to the
teamassociated web site and download the 12R5.2 pdf
It does make sense that they touch.
I have them mounted on the inward holes. I wonder if they should be mounted on the outward holes so the make contact with the top of side pod links instead of chassis. That would make up all that extra space.
There is not much adjustment I could make with the set screw, I have them screwed almost all the way down but I still have about a quarter of an inch space