Originally Posted by
Nat Maniac
hi all,
I need help!
anyone know what 3 flashing less means? red blue yellow?
when i turn on the power blinky - ok
when i turn on the TX the all led flash
I can turn the steering but no motor power
I have just re wired both esc on two cars that have identical set ups, one works fine but now I have this issue with one. Ive checked to make sure the A,B,C wires are attached in the correct order and have also replaced the sensor wire but can't seem to resolve the issue...
any ideas??
thanks very much, have a race in 20 hours from now!
Thanks!!!!
ok so I've solved my own problem but just for reference with the power off on the car and esc I manually spun the motor rotor with my hand about 10 rotations, turned everything back on.....the car turned on doing about 10k RPM scaring the heck out of me but after recalibration its back to normal...
I think this was caused by me spinning the rotor to prior to the work beginning with the power off as I adjusted the pinion mesh before i started.
Anyway in short give the rotor a whirl the power off if all lights are flashing.
cheers