Originally Posted by QDRHRSE

I think I'm using 6mm ballstud with the aluminum hubs. I run the rear link as long as it will go with 1 mm under the ball on the hub and the mount flipped -2 with 1mm under the inside ball....which is in the inside hole. I ran my truck for the very first time today and it was really awesome. I did really well without any practice. I was really pleased. The traction was super high and I ran a square pack. No nose diving although I modified the truck quite a bit when I built it. I upeed the shock oil to 35 all around and the front was definitely too soft.