View Single Post
Old 07-20-2015, 08:04 AM
Tech Fanatic
iTrader: (2)
Join Date: May 2013
Location: Kingsport, TN (Still SC tho)
Posts: 852
Trader Rating: 2 (100%+)

Originally Posted by coombes View Post
Do I need any spare parts for this truck what breaks the most
I haven't had anything break yet (knock on wood) and it has been thru some hard landings. I did bend two rear stock shock towers (same problem I had on v1). Went with the carbon fiber and so far so good (got two weekends of racing on them). If you decide to get carbon fiber shock towers, you probably could just start with the rear. I've never bent a front one. I'm running an aluminum A hinge pin block. Structurely, thats all I've done. Its may be wise to get an extra set of a-arms, but I've never broken one v1 nor v3 and I learned to jump and race on v1. You may eventually want to get some springs for your shocks for tuning purposes. I do think the stock rear is too soft if you have bigger jumps or whoops.
qstorm777 is offline  
Reply With Quote