View Single Post
Old 07-19-2015, 05:35 PM
  #1615  
mxturd
Tech Regular
iTrader: (36)
 
Join Date: Apr 2012
Posts: 413
Trader Rating: 36 (100%+)
Default

Originally Posted by qstorm777 View Post
Right. But he says his droop screws aren't touching the chassis so I'm wondering if they touch without the springs attached. Second, I was wondering if for some reason his shocks weren't long enough to obtain the proper length.
I took the shocks off, and the arms still don't go down far enough for the droop screws to touch the chassis when they are fully screwed in. Seems like it may be the tie rods or camber links, because I made sure that the arms moved very nice before installing. And they seem to move freely with the shocks disconnected. Anyway I ran a couple packs through it and it worked great. Had it all set as box setup except I ran 30wt oil and green springs in the rear and the 1.5 pistons all the way around. For the droop, I just turned the screws down till they touched the chassis, since droop was 105 like that. Thanks
mxturd is offline  
Reply With Quote