Originally Posted by Bubblehead21

Clicking RX8 g2 and LED1-2 and LED 6-7 flashing:
I just finished installing the RX8 Gen2 with Pro4HD 4600kv motor in my SC10. Everything seemed to be working great. I tested the motor, fwd, brake and reverse all worked fine.
Then I connected the Hotwire2 via my Samsung S3, still ok.
I was having problems figuring out the HW2 Android App, connected and reconnected several times. Went to test the motor and nothing. I noticed that LED 1/2 and 6/7 are on and the ESC is clicking.
The sensor wire is seated and connected
Motor is set to 3, brushed fwd with delayed reverse
and I double checked the motor terminals, there does not seem to be any shorts between the terminals on the motor or on the ESC.

Any ideas how to fix this?

Thanks