R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
View Single Post
Old 06-26-2015, 06:38 AM
  #1377  
Hoese37
Tech Elite
iTrader: (5)
 
Hoese37's Avatar
 
Join Date: Apr 2007
Location: Hutchinson, MN
Posts: 3,819
Trader Rating: 5 (100%+)
Default

Originally Posted by qstorm777
Yeah. They do look good installed. I'm worried about the durability. I trust aluminum more. Anyway, just throwing that out there.
No need to worry about the towers. The rear is now 5MM thick, and the front has lost the recesses for the stand off. So there is now more beef in the towers which will reduce breakage.

[QUOTE=theboss13;14069283]Ok so what is the problem with the castle sidewinder sct setup?(it is the sct edition of the esc) Is the motor too weak or does the esc not provide enough amps? I'm kinda confused as to what sct it is for as a four pole is a bit overkill in 2wd and if it can not pull a 4wd what is it for?QUOTE]

Its pretty much made for the Slash. A light weight vehicle. At one point on their site Castle recommended the vehicle be under 5.5lbs to run it. The Tekno is just too big for the 65A ESC to handle.
Hoese37 is offline