Originally Posted by
Autostrada048
The stock plastic toe blocks SUCK unless you have the TA05R with the aluminum toe blocks.
So I should use XA-E and or XA-D for the front and rear? or would that just be for the rear and use 1A's for the front?
No. He is referring to rear only. XA-D will give you 2.5 toe in on rear, XA-E 3.0, F 3.5
On front the kit comes with A/A. You can increase front width by going to B/B or C/C. The wider the front the calmer the steering.. Too wide will make it numb.
You can go B/C or C/D in front .. That creates arm sweep which is good for tracks with tight corners. For initial set up, I would avoid the sweep set up.