Originally Posted by
big al
I don't think you need to change the toe blocks. If you were to buy the light weight suspension kit, toe blocks aren't included. You would just use the original ones.
The stock plastic toe blocks SUCK unless you have the TA05R with the aluminum toe blocks. I'm running the reversible arms in the front and rear.
Originally Posted by
tobyzhang
Most common is XA-E or XA-D depends on condition. Ver 1 is slightly better than v2 in lower traction condition and v2 is more nimble and slightly better in higher traction condition from comparing my v2 to friend's v1.
So I should use XA-E and or XA-D for the front and rear? or would that just be for the rear and use 1A's for the front?