SOLD!!! I had a hard time believing this was actually an .18 because it seems so large. I confirmed by measuring the bore diameter which is 15.7mm. The mounting tabs are also more narrow then that of a .21-.32 as well as the exhaust port. It’s an SG shaft with a 2-needle slide carb. This would make a great nitro drift car motor with all the low end grunt it has and the large cooling head. It would also be home in a 1/10 2wd-4wd stadium and even an older T-Maxx or Revo. Engine will come with 2X NEW Axial #4 plugs as spares ($10-$12 value). SOLD!!!

No Trades, PayPal or local pickup only.