Only had time yesterday to get on track due to busy schedule. I tried all the settings throughout the frequency range from 1khz up till 32khz. Turns out that as per dan vector recommendation, 2khz has the best feel and bite response. Also had to put a 10% drag brake and Initial Braking set to drag braking. So far its been sufficient for the track I'm running at but I would still like a bit more initial bite. That's all on the ESC setting.

On the radio TX side, I reset all braking EXP back to 0 value. After that I tried reducing the EPA for braking down to 70% but it results in the overall braking power reduced. One question SeanV, after you set the EPA down, did you recalibrate the ESC throttle and braking range again? I did not do that, maybe that is the problem.

Anyway, in the end I had one of the more experienced racers at the track try out my setting without the reduced EPA, he said he the brake was ok by his standard. I guess its all down to everybody own feel.