Originally Posted by
smilekt
still same problem .. cannot use ddrs 5 and above ... throttle still have one time kicking on start ..
Start fresh. Connect the ESC to your PC and load the newest software/firmware. Make sure your programming card also has the newest software.
Then once you choose your profile, calibrate your ESC to the TX. If you have swapped the sensor wire and other things you mentioned maybe also look at the motors sensor board. Did you try running with no sensor wire attached? If it still runs strange with no sensor wire the sensor board in the motor might need to be replaced.
Originally Posted by
latentspeed
Been using reedy mach2 motors for a while and and have gotten bored with its power delivery. Thinking about getting a v4 7.5 for t5m truck. What's the power delivery like for the v4? Smooth, strong mid range? Anyone tried both reedy mach2/any copy and v4 that can tell me the difference? Does one motor feel livelier?
The new modified V4s are awesome. Michal Orlowski just TQd and won 2WD modified at the European Offroad Series finale with a V4.
Originally Posted by
RC GB
What does the r and s stand for on the reventon esc?
Do they come with Blinky loaded?
They just designate different levels of ESC. Racing and Sport is what some say, but not necessarily official designations.