R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
View Single Post
Old 05-10-2015 | 03:53 PM
  #730  
Shawn_S's Avatar
Shawn_S
Tech Addict
iTrader: (20)
 
Joined: May 2011
Posts: 742
From: Emerald Coast
Default

Had a great first race with the .3 yesterday. I had yet to setup droop and ride height till I got to the track, so unfortunately I had to make due with a front riding too high. I am running box stock setup except for pistons and shock oil. Pistons are Imbue V2 5-hole, and started off with 32.5f/27.5r. Imbue pistons need some time to break-in, so that's why I went a little too soft.

As far as the truck, totally impressed. Track was a smaller outdoor, that's normally grooved, but slick. Yesterday the traction was way up. Truck was a little loose, due to the front springs no doubt. There are several smaller jumps, almost kickers that I was fearing due to previous experience with the original 410. No problems at all, the truck jumps great, no nose-down tendencies. I was most impressed with the correctability in the air, able to bring the nose up or down.

Unfortunately the other real fast guy had some issues all day, so it was an easy sunday drive to TQ and win. Looking forward to the next one!
Shawn_S is offline