Originally Posted by wingracer

Just an FYI for you, ALL sensor wires will work. The connectors for motors and speedos are a standard part in the ROAR rules so any brand or type will work. All you need to do is figure out what length you need. If you don't have one around to compare to, just take a piece of string or wire and run through where you need to go, cut it or mark it to length, pull it out and measure it.

Or just get one you now is too long and bundle up the excess.

TQ are my favorites. LRPs are pretty good too. TQ and I suspect most others give the measurement from the inside of the connectors.