Originally Posted by
fredygump
unless you have an ESC that allows you to connect your batteries balance cables to it, it is impossible for the ESC to know the voltage of individual battery cells. The ESC can't tell the difference between two cells at 3.5 volts, or one at 3v and the other at 4v--both read as 7 volts. That's why it's a good idea to use a higher LVC.
The order the cells are connected shouldn't make any difference.
dammit you're right ! I guess the only purpose to show an individual cell LVC is that the ESC recalculate the total LVC whenever you connect a 3s or 4s or 6S lipo ( like I do some times )