R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
Thread: Tekno RC SCT410.3 Thread
View Single Post
Old 04-23-2015, 07:24 PM
  #505  
Matthew_Armeni
Tech Master
iTrader: (31)
 
Matthew_Armeni's Avatar
 
Join Date: Nov 2007
Location: Temecula
Posts: 1,864
Trader Rating: 31 (100%+)
Default
Originally Posted by ba4ma
Anyone know what size the shims are that fit behind the aluminum hex nuts on the stub axles?
For the SC and SL, the shims that go behind the hex are PN: TKR1230 and are only needed if you have excessive play between the hex and the bearing.http://www.teknorc.com/shop/tkr1230-...m-shims-10pcs/

Originally Posted by lala4fire
I asked the same question a while back and now am able to return the favor.
The answer I got was part# ser600215 from Amain (8x11x0.2mm) and it worked perfectly. Now pay it forward!!!
I think you might be referring to the shims that you could use on the 8th scale, as they use an 8mm stub axle.
Matthew_Armeni is offline  
Reply