http://www.rctech.net/forum/electric...-platform.html

This is the original thread on this car. I have raced this chassis at TITC and we used the original yellow friction shocks with heavy oil, red springs front, yellow springs rear, with short lipos fitted. We used the 50/25 gear and 31 tooth pinion with a 17.5 brushless blinky system.

My current setup with Sweep 33 front tyres and spice 28 rear is with the new alloy knuckles, shocks etc. I run a short lipo pack and use 5mm hexes on the car. 1 degree front toe out, 5mm ride height a little droop and had no handling issues at all. Car is on rails. I use the Suburu BRZ body shell.

I also use the white or blue spring up front and the yellow or black spring on the rear. Great car, I just need to use a less powerful/torque motor system in the car. Our standard 13T BL systems have a great deal of torque and I tend to chew gears.

I like the car that much I have 3 of them in swb plastic chassis, swb graphite chassis and mwb plastic chassis. The mwb is two chassis cut and glued together.