R/C Tech Forums - View Single Post - How to solder correctly (a not so brief lesson)
Thread: How to solder correctly (a not so brief lesson)
View Single Post
Old 04-18-2015 | 06:55 AM
  #439  
Super08's Avatar
Super08
Tech Apprentice
 
Joined: Dec 2014
Posts: 72
From: Alberta, Ca.
Default
No need to sand, plumbers flux may be for acid core based solder or other. If you want to try it and see if it is compatible do so on a test piece. Some flux and solder compounds are not compatible.
Super08 is offline  
Reply