Originally Posted by
Smile
If there is really no binding anywhere, i'd start looking at the diffs. I once had my XV01 oversteering like crazy towards the right, and understeering towards the left. I checked everything: toe, shocks, binding, camber and didn't see any problems.
I then checked the diff. Although it was dryer than usual, wierdly everything looked okay and diff action was smooth. There was a clicking sound in the rear under acceleration though, so I decided to change the internal diff gears. After that, everything seemed to run okay.
Moral of the story is, if everything seems normal, but the handling is widely different when comparing turning left and turming right, the problem probably lies within the differential.
Cheers Smile.
I swapped out both diffs for new ones just recently, still seemed to have some problems so basically swapped out the entire steering, front arms and uprights.
Still not 100% but much better.
Might try the rear suspension too, perhaps something is bent there.
Guess that's the risk you run buying used!
I think I also figured out the clicking noise - think it was one of the bevel gears but waiting on new parts to confirm.
Cheers,
Crouch