R/C Tech Forums - View Single Post - Xray XB4 thread
Thread: Xray XB4 thread
View Single Post
Old 04-04-2015, 07:58 AM
  #7860  
suzukipro
Tech Fanatic
iTrader: (33)
 
suzukipro's Avatar
 
Join Date: Jan 2013
Location: WI
Posts: 918
Trader Rating: 33 (100%+)
Default
Originally Posted by Norse
XRAY XB4 vented Aluminum Shock Caps Questions?

Do the bleeder screws on the shock caps need o-rings?
Do the shock cap shims act as seal as well? If so my guess would be to lightly grease them or lightly coat with Green Slime?

Any advice is greatly appreciated.
Yes, you'll need the small 2mm o-rings for the bleeder screw holes (exotek sells replacements), Not sure about shock cap shims, but I know you need an o-ring between the shock body & shock cap (can use one from the plastic caps too).
suzukipro is offline  
Reply