Originally Posted by
mtveten
Are you using the v2 shocks, they are a few mm shorter than the v1 shocks. I never tried v1 shocks but with the tamiya aluminum steering blocks I think i ran 1.5mm of spacers above the spindle to get 4.5mm ride height and adjusted the spring collars from there.
Thank you very much! I was using v2 but with the long rod end to have the same length as the v1 (and to have longer shock travel). Now I have changed the rod end to the short end one and it is very easy to have 4-5 mm ride heigth.
I haven't manage to find 120wt so I will start with 100wt both in the front and in the rear. I think that it should be fine since the where in northern Europe is still rather cold.
Thanks again!!