Originally Posted by
TheCore
example.. i'm not willing to replace my carbon towers, but would like the new arms and hubs what are my new link lengths and what locations become the "box stock" starting points ?
Very few things need to be replaced together, but your example is one of them.
The new shock towers have the mount points lower and further out. This matches the arms having the mount points further out. If you don't replace both, you won't have much droop available, the shock angle won't be similar, the piston speeds and forces won't be even close, etc...
But if you replace those 2, the rest should work but you will now have the new shock angles/distances/etc.