Hey all,

Need some help with a couple of TT-02 problems.

Firstly I've got two that have started making a significant rattle from the driveline area. Happens on acceleration and reverse.
Sounds like it's somewhere in the diffs or along the driveshaft but I've exaimined everywhere and can't seem to track it down.
One of them has bearings along the drivetrain the other the stock plastic bushings but both making almost identical noise even after a fesh strip down and clean.
Thoughts?

Secondly I've got one (and I know DJ has had a similar issue) where it pulls significantly to one side.
its quite a significant hard turn mainly when not on power - I've checked for binding in the steering and front uprights, put a servo saver on, put a new servo in, checked the wheels spin freely, checked all the wheels slow down at the same rate when bench testing, checked the drivetrain bearings have no drag, no missing teeth on any cog or in the diffs, the servo seems to centre reasonably well and am now in the process of stripping the driveline and diffs.
This diffs do feel a bit gritty so I might fully clean them but does anyone else have any suggestions on where I can look to find the source of this problem? Is there any chance it could be my radio gear?

Many thanks in advance.
Crouch