Originally Posted by
macscac
need advice..
i keep getting binding in the rear. forgive my verbage while describing the issue.
the small wheel that keeps the belt on the rear diff gear will not stay in place. it keeps popping loose and then jamming the belt into the diff gear.
has anyone else had this issue?
I would recommend checking to see if you are assembling it correctly. I know at least in the front from memory that i fyou don't assemble the pulley correctly, its possible to have it slide off. I would check there too as it may be causing issues in that manner affecting the rear.
Make sure you tensioner pulleys are adjusted correctly too, and all else if you have a spare belt drop that on too.