R/C Tech Forums - View Single Post - Emaxx Setup Problems
View Single Post
Old 02-26-2015 | 01:19 PM
  #2  
MaxxWrecker07
Tech Adept
iTrader: (3)
 
Joined: Feb 2011
Posts: 130
Default

Originally Posted by Truth Isnt Here
using the truck for speed runs, not sure which model i have. my problem with the truck is that, when i get it down the street and finally pull the trigger all the way, it lifts up, but only one side does(not all the time,but alot)
im thinking that there is something wrong with how i have truck setup up or maybe there is something missing.. heres what it has
Mamba Max Pro/w 2200kv
6 cell 2x-3cell
86/26 gearing
diffs never been touched or checked
shocks are factory i believe? with plastic pre loads,also never been checked or looked at..
all new bearings in everything.
stock drive train--tranny,axles,diffs,drive shafts
rpm arms,knuckles
Does your suspension move freely? You may have a shock binding up or a pillow ball cap (in the knuckle) too tight, causing the articulation of the arm to seize up.
MaxxWrecker07 is offline