Originally Posted by
Neverstop
You have to run a cap castle creations do not have strong enough bec for it.
it will work for a hv servo. it will go all the way up to 9v. you have to use a castle link usb connector to raise it from it's stock 5.1v setting though.
http://www.castlecreations.com/suppo...user_guide.pdf
the bec pro will go up to 12.5 v output.
http://www.castlecreations.com/suppo...user_guide.pdf
which is why I never bothered to buy one to use with my hobby wing esc. I don't feel like spending $45 for both just to increase my servo speed a little bit.