Tekin Pro4hd 4300 Kv and Castle MMP esc lcok up
Ok guys I just bought a Tekin Pro4hd 4300 Kv motor and a Castle Mamba Max pro This weekend for my Losi Scte. I'm having problems with the power cutting off if I accel hard . If I accel slow seems like I have no issues, however when accel from dead stop it jerks bad and if in a turn wheels will go straight as if I've lost all power. I'm using a Hitec HS-7955TG Digital HT Titanium Gear Coreless Servo. Battery is a SMC 6500 with a 70c and 140c burst. Receiver is a sr300 and radio is a spectrum Dx3r. I've tried Different batteries different servo, I have solder the motor direct to the ESC elimitain the bullet plugs and I have soldered the bullet plugs to power so that esc plugs directly into battery without the need to deans or traxxas connector. Im stumped at this point. Castle sasy motor is to much for the esc however Tekin says it is not. I know others run this set up. any help would be nice