R/C Tech Forums - View Single Post - CRC F1
Thread: CRC F1
View Single Post
Old 02-11-2015, 12:28 AM
  #324  
aittam
Tech Apprentice
 
aittam's Avatar
 
Join Date: Dec 2007
Posts: 51
Default

Originally Posted by dumper
You could try a couple of things. First and foremost make sure you are getting full steering throw. Also make sure your servo saver is not giving out.

If those two things are handled you can try a stiffer center spring, reducing rear droop, increasing front droop, stiffer side springs, softer front tires. On carpet I tend to run full front additive. You can also try raising the rear ride height.
Thanks for the tips! I will try them next time i go to the track.
I have full steering throw. I had to turn down EPA to 65% both left and right to avoid binding of the front suspension when going full lock. The servo saver is tight.
By the way, I was already using full front additive.
aittam is offline