R/C Tech Forums - View Single Post - Turnigy Trackstar 120 A 1 cell esc
Thread: Turnigy Trackstar 120 A 1 cell esc
View Single Post
Old 01-19-2015, 05:03 PM
  #95  
disaster999
Regional Moderator
iTrader: (1)
 
disaster999's Avatar
 
Join Date: Aug 2001
Location: Hong Kong
Posts: 3,996
Trader Rating: 1 (100%+)
Default
Originally Posted by Dray01
Also keep in mind that if you set the turbo activation by full thottle + rpm you need to set the right rpm else you will not see anything. EG: if you are running a 13.5t and set the turbo activation to 30000rpm then you will not engage turbo.
Personally I prefer to activate turbo on full throttle only so i do not need to do the math You still will need to set your boost rpm range though.

What motor and rollout are you running? Maybe we can point you in the right direction with the settings.

BD
Im running the Trackstar 10.5T motor. I have the turbo set to full throttle. I didnt get the program card while ordering from HK and I couldnt justify ordering from them again since I dont need anything else, so I dont what my motor RPM is.

Reading through the discussion on HK, I found the SkyRC USB link works with the trackstar ESC so I found and bought that locally and used that to tune my ESC. Works pretty well.
disaster999 is offline  
Reply