Originally Posted by
hyperc10
I just received my order 11947 for my MT4 it does not fit not even close. In the installation instructions it states to remove wheel travel adjustment plate. The trim plate cover and the adjustment plate are one piece.
Also the machined hex on your components are larger.
Nothing fits correctly I'm very disappointed I would like a refund or replacements that work correctly.
Hello,
Just responded to your email with the same answer.
From the pics you emailed us, it appears that you are trying to mount the GRID drop down onto the radio, with the wheel travel plate and trim cover both removed.
The correct order to install the GRID drop down is:
1. Remove both the steering wheel and the wheel travel plate temporarily.
2. Remove the five screws on the trim cover.
3. Attach the rear shell of the GRID drop down to the trim cover with the five screws from step 2.
4. Place the MT4 wheel travel plate back on the radio and Install the GRID upper control lever on top of it. Then use the original steering wheel screw to bolt it on to secure it.
5. Follow the instructions to install the remaining GRID drop down parts.
If you have further questions regarding the installation, let me know.
Regards,
Ron
Team GRID