Originally Posted by
rceefreak
I asked if an alternate flywheel and clutch setup would work on this truggy and someone said they were using the m2c 34 mm four shoe clutch. Also wondering if u can use a normal bell such as mugen or agama on this truggy or if u had to use the tekno specific flywheel? Nothing wrong with the tekno setup I just have other truggies and I move my engines around a lot and would like to just swap engines without having to tear the clutch and clutch bell off to put on the tekno
The only way you can use another clutch bell is to shim the flywheel, as the tekno clutch bell is a lot longer than a standard clutch bell, in my experience the mugen clutch bell probably gets the closest length as it is long as well but still needs to be shimmed, just not as much as say a kyosho bell, either way if your moving your engines around you will still have to dismantle it in order to shim it to get the required mesh.