Anyone have a good e-buggy light setup for the EB48 (2S lipo, small track indoor clay) Mainly concerned with oils to run in diffs and shocks, along with springs. I have Kyosho 1.3x8 pistons front and rear.
I previously had my EB48 setup for the Blair DNC setup at my old huge outdoor track on regular 4S electronics but the track has since closed down.
I don't have a full setup sheet on me right now, but most of us are running 7-7-5 now at my local track where 2s eBuggy Lite has taken off. Most of us run a stiffer suspension setup on the medium grip clay/dirt mix with super soft tires or clay/soft if you like to drive sideways.
For shocks, my general recommendation is if you like how it drove with full 4s pack and 8th scale motor weight on the new track, drop the springs 1 color and your oils by 2.5 or 5 wt and start from there when switching to the 2s and sc motor setup.