Other Information
Break in with 0.6mm shims(stock);min 12% oil. If it is too tight open the plug a bit(1/2 lap) and tighten it after start.
After break in use 0.4mm shims with 25% nitro;#5 long body plug.
It work fine with STS 0403 buggy pipe.
Some kit need to find a engine mount. Be careful to use the pull-start system. You need to know the total length of the line before you start the engine. Do not over pull it out.
Have fun!
Last edited by dino.tw; 02-06-2005 at 10:42 PM.